L'attività scientifica dell'Ing. Massimo Rogante - Accademia dei Catenati - Macerata

Cerca
Vai ai contenuti

Menu principale:

L'attività scientifica dell'Ing. Massimo Rogante

STUDI E RICERCHE
Da “La Chimica e l’Industria”, Organo Ufficiale della Società Chimica Italiana,
N. 07, pg 8
Intervista all'Ing. Rogante pubblicata dalla rivista Business, Tourism & Fashion, 2010-11, pagg. 1-10-11

LE PUBBLICAZIONI DELL'ING. MASSIMO ROGANTE
Papers are listed in descendant chronological order.
Contributions to daily or weekly press, school texts, occasional texts and similar are not included


130    M. Rogante, U. Pasquini, L. Rosta, V. Lebedev, Feasibility study for the investigation of Nitinol self-expanding stents by neutron techniques, Physica B: Condensed Matter, Vol. 406 (2011), pp. 527-532.


129    M. Rogante, P. Mikula, M. Vrána, Residual stresses assessment in coated materials: complementarity between Neutron and X-ray techniques, Key Engineering Materials, Vol. 465 (2011), pp. 259-262. doi:10.4028/www.scientific.net/KEM.465.259


128    M. Rogante, L. Rosta, Forged components and possibilities of their investigation by neutron techniques, Proc. 1st Int. Conf. Mechanical Technologies and Structural Materials MTMS 2010, Split, Croatia, 21-22 Oct. 2010, D. Živkovic', Ed., Croatian Society for Mechanical Technologies, Split, Croatia (2010), pp. 69-81.


127    M.E. Heaton, M. Rogante, A. Len, D. Denieffe, Investigation of the processing effects of UV, heat and laser ablation on SU-8 microturbines: a first approach by Small Angle Neutron Scattering, Multidiscipline Modelling in Materials and Structures, 6/3 (2010), pp. 364-372.


126    M. Rogante, L. Pallottini, E. Petricci, X-ray detection by Si(Li) semiconductor counter for materials investigation, Advances and Applications in Mechanical Engineering and Technology, 1/2 (2010), pp. 167-181.


125    M. Rogante, Zs. Kasztovszky, A. Manni, Prompt Gamma Activation Analysis of bronze fragments from archaeological artefacts, Matelica Picenum necropolis, Italy, NNLS 15/1 (2010), pp. 12-23.


124    P. Genta, M. Rogante, Tecniche neutroniche per i modelli predittivi di danneggiamenti di pipeline, ICP n°1 - Gen. 2010, Reedbusiness, Milano (2010), pp. 66-70. In Italian.


123    M. Rogante, P. Mikula, M. Vrana, Through-the-thickness residual stress analysis by neutron diffraction in inoxidizable martensitic steel samples with and without tungsten carbide coating, Surface and Coatings Technology, 204 (2009), pp. 650–656.


122    M. Rogante, Neutron Techniques for scientific research in the polar areas, Il Polo, Volume 2 (2009), pp. 67-82.


121    F. G. Cesari, M. Rogante, A. Giostri, Assessment of gaseous pollution from hot cutting processes in NPP disassembling, 20th International Conference on Structural Mechanics in Reactor Technology SMiRT 20, Espoo, Finland, S. Vuori and R. Rintamaa, Ed., Book of abstract, Vol. 2 (2009), p.389.


120    M. Rogante, F. G. Cesari, G. Ferrari, Analytical method for residual stresses determination in thin welded joints, Multidiscipline Modeling in Materials and Structures, Volume 5, Number 3 (2009), pp. 269-276(8).


119    M. Rogante, Wear characterisation and tool performance of sintered carbide inserts during automatic machining of AISI 1045 steel, Journal of Materials Processing Technology, Volume 209, Issue 10 (2009), pp. 4776-4783.


118    P. Genta, M. Rogante, Failure predictive models for pipelines through Neutron Diffraction-based stress assessment tools, The Open Petroleum Engineering Journal, Volume 2 (2009), pp. 12-16.


117    M. Rogante, Applicazioni Industriali delle Tecniche Neutroniche nel settore della Metalmeccanica, Trattamenti e Finiture, Tecniche Nuove Ed., Milano, Vol. 2 (2009), pp. 48-54. In Italian.


116    M.E. Heaton, M. Rogante, Zs. Kasztovszky, D. Denieffe, Prompt Gamma Activation Analysis of impurity and elemental stability for two SU-8 organic polymer samples having different solidification pre-treatment, The Open Inorganic Chemistry Journal, Volume 3 (2009), pp.33-38.


115    M. Rogante, Tecniche Neutroniche per lo sviluppo dei metodi progettuali di saldatura, Rivista Italiana della Saldatura, Istituto Italiano della Saldatura, Ed., Genova, Vol. 1 (2009), pp. 39-47. In Italian.


114    G.M. La Vecchia, M. Gelfi, G. P. Marconi, M. Rogante, Importanza della misura dello stato tensionale residuo di rivestimenti ottenuti per spruzzatura termica, Atti del 32° Convegno Nazionale AIM, Ferrara, 24-26 Sett. 2008, Associazione Italiana di Metallurgia, Milano (2008), ISBN 88-85298-67-2.


113    M. Rogante, Applicazioni Industriali delle Tecniche Neutroniche, Proc. 1st Italian Workshop for Industry "Industrial Applications of Neutron Techniques", Civitanova Marche, Italy, 12-14 June 2008, Rogante Engineering, Ed. (2008), pp. 40-120.


112    F. Cesari, M. Rogante, A. Giostri, Results of the experimental campaign on contaminated metal components parameters and suggestions for safely NPP component dismantling, Nuclear Engineering and Design, Volume 238, Issue 10, (2008), pp. 2801-2810.


111    A. J. Farrell, M. Rogante, A feasibility study for a SANS investigation of Phase Change Material for energy storage applications, Proc. Int. Conf. “MATRIB 2008”, Vela Luka, Croatia, 26-28/06/2008, K. Grilec, G. Maric', S. Jakovljevic', Eds., Croatian Society for Materials and Tribology, Zagreb, Croatia (2008), pp. 481-486.


110    M. Rogante, G. P. Marconi, Residual Stress determination by Neutron Diffraction in Tungsten carbide coated and shot peened steel samples, Proc. Int. Conf. “MATRIB 2008”, Vela Luka, Croatia, 26-28/06/2008, K. Grilec, G. Maric', S. Jakovljevic', Eds., Croatian Society for Materials and Tribology, Zagreb, Croatia (2008), pp. 295-300.


109    M. E. Heaton, M. Rogante, A. Len, A feasibility study for a SANS investigation of a heat cured and laser machined organic resin microturbine as used for airflow sensing, Multidiscipline Modeling in Materials and Structures, Volume 4, Number 2 (2008), pp. 155-162.


108    M. Rogante, P. Genta, Neutron diffraction-based tools aid failure forecasting models, Oil & Gas Journal, Mar. 17, 2008, pp. 56-61.


107    M. Rogante, V. T. Lebedev, SANS comparative investigation of Inconel 738 samples submitted to different ageing treatments, Materials and Design. Volume 29, Issue 5 (2008), pp. 1060-1065. DOI:10.1016/j.matdes.2007.04.008.


106    M. Rogante, Neutroni per l’investigazione di componenti e materiali industriali, ICP n°2 - Feb. 2008, Reedbusiness, Milano (2008), pp. 72-75. In Italian.


105    F.G. Cesari, M. Rogante, A. Giostri, Precautions arising from the experimental campaign on contaminated metal components parameters for safely nuclear power plant components dismantling, Transactions, 19th International Conference on Structural Mechanics in Reactor Technology SMiRT 19, Toronto, August 12-17 2007, paper # W01/4.


104    M. Rogante, P. Genta, Forecasting failure models for pipelines through neutron diffraction-based stress assessment tools, Proc. PRM ‘07 Int. Conf., Exhibition & Workshops on Pipeline Rehabilitation & Maintenance, Manama, Bahrain, 10-13 Dec. 2007. CD volume.


103    M. Rogante, J. Luston(, L. Rosta, Nanoscale investigation by SANS of 2-(4-hydroxyphenyl)-2-oxazoline compound monocrystals, Book of abstracts (posters) 4th European Conference on Neutron Scattering, 25-29 June 2007, Lund, Sweden (2007), p. 411.


102    M. Rogante, V. T. Lebedev, Microstructural characterization of polymeric materials by small angle neutron scattering, Polymer Engineering and Science, Vol. 47, Issue 8 (2007), pp.1213-1219. DOI: 10.1002/pen.20760.


101    M. Rogante, G. De Marinis, Zs. Kasztovszky, F. Milazzo, Comparative analysis of Iron Age bronze archaeological objects from a Picenum necropolis of Centre Italy with Prompt Gamma Activation Analysis, Nuovo Cimento C, 30/1 (2007), pp. 113-122. – DOI: 10.1393/ncc/i2006-10037-7.


100    M. Rogante, F. G. Cesari, V. T. Lebedev, Defectoscopy and perspectives related to metallic materials adoptable in hydrogen storage pressure tanks production, Proceedings of the NATO Advanced Research Workshop on Hydrogen Materials Science and Chemistry of Carbon Nanomaterials (ICHMS'2005), Sevastopol, Crimea, Ukraine, 5-11 Sept. 2005, T.N. Veziroglu, S.Y. Zaginaichenko, D.V. Schur, B. Baranowski, A.P. Shpak, V.V. Skorokhod and A. Kale, Eds., NATO Security through Science Series, Vol. XLI (2007), pp. 135-144.


99    M. Rogante, V. T. Lebedev, Nanostructure characterisation by SANS for investigation on ageing, Proc. 31st ESReDA Seminar, Smolenice Castle, Slovakia, November 7-8, 2006, L. Petterson, G.M. Cojazzi, Eds. (2007), pp. 58-68. ISBN 978-92-79-06575-0


98    M. Rogante, F. G. Cesari, G. Ferrari, P. Battistella, A simplified solution for the evaluation of residual weld stress, Welding International, Vol. 20, Issue 9, (2006), pp. 713-716.


97    M. Rogante, V. T. Lebedev, S. Kralj, L. Rosta, Gy. To"ro"k, Neutron techniques for welding project methods development in nuclear/traditional industrial application, Multidiscipline Modeling in Materials and Structures, Vol. 2, Number 4, (2006), pp. 419-433.


96    F. G. Cesari, M. Rogante, A. Giostri, G. Conforti, Contaminated metal components in dismantling by hot cutting processes, Proc. ICONE14 Int. Conf. on Nuclear Engineering, July 2006, Miami, Florida, USA, ASME ICONE14-89451 (2006), ISBN 0791837831.


95    M. Rogante, Prompt Gamma Activation Analysis (PGAA) per l’investigazione di reperti archeologici, Archeopiceno, n° 43/44, anno XIV (2006), pp. 27-31. In Italian.


94    M. Rogante, V. T. Lebedev, Microstructural characterization of polymeric materials by Small Angle Neutron Scattering, Book of abstracts 20th Bratislava International Conference on Macromolecules, ADVANCED POLYMERIC MATERIALS 2006, Bratislava, June 11-15, 2006, p. 172.


93    M. Rogante, P. Battistella, F. Cesari, Hydrogen interaction and stress-corrosion in hydrocarbon storage vessels and pipelines weldings, International Journal of Hydrogen Energy, 31/5 (2006), pp. 597-601.


92    M. E. Heaton, M. Rogante, A. Len, A feasibility study for a SANS investigation of a heat cured and laser machined organic resin microturbine as used for airflow sensing, Proc. Int. Conf. "MED06 Materials, Energy, Design", DIT, Dublin, 14-17/03/2006, D.M. Kennedy, Ed., Dublin Institute of Technology, Bolton St., Dublin, Ireland (2006), pp. 105-111.


91    M. Rogante, V. T. Lebedev, SANS comparative investigation of Inconel 738 samples submitted to different ageing treatments, Proc. Int. Conf. "MED06 Materials, Energy, Design", DIT, Dublin, 14-17/03/2006, D.M. Kennedy, Ed., Dublin Institute of Technology, Bolton St., Dublin, Ireland (2006), pp. 202-213.


90    M. Rogante, The application of neutron examination to the pipeline industry, The Journal of Pipeline Integrity, Vol. 4 number 4, (2005), pp. 211-218; Global Pipeline Monthly, Vol. 2, issue #01 - January 2006, pp. 1-7; Petroleum Abstract, Vol. 46, Number 35, September 2006, Abstract No. 903835, p. 81.


89    M. Rogante, F. G. Cesari, G. Ferrari, P. Battistella, Una soluzione semplificata per la valutazione dello stato tensionale residuo di saldatura, Rivista Italiana della Saldatura, Istituto Italiano della Saldatura, Ed., Genova, Vol. 5 (2005), pp. 701-705. In Italian.


88    M. Rogante, Neutron examination techniques applied to pipelines, Oil & Gas Journal, Sept. 26, 2005, pp. 59-64.


87    M. Rogante, J. Šaroun, P. Strunz, G. F. Ceschini, V. Ryukhtin, P. Lukáš, V. Marinc(ák, Nanoscale investigation by SANS of Inconel 738 turbine blades after high-temperature operation, Kovove Mater, Vol. 43 (2005), no. 5, pp. 371 - 381.


86    F. Cesari, A. Giostri, M. Rogante, E. Sirito, M. Sirito, Hot cutting processes and emissions characterization in metal components dismantling, Proc. of 11th Int. Scientific Conf. on the Contemporary Achievements in Mechanics, Manufacturing and Materials Science CAM3S`2005, Gliwice-Zakopane, Poland, 6th-9th December 2005, L.A. Dobrzan'ski, Ed., International Organising Committee of the Scientific Conferences AMME World Press, Gliwice, Poland (2005), pp. 1111-1116.


85    F. G. Cesari, M. Rogante, V. T. Lebedev, I. Pelonzi, Defectoscopy and solutions perspectives related to metallic materials adoptable in Hydrogen storage tanks production, Book of extended abstracts IX Int. Conf. Hydrogen Materials Science & Chemistry of Carbon Nanomaterials ICHMS’2005, 5-12 Sept. 2005, Sevastopol, Ucraine, D.V. Schur, S.Yu. Zaginaichenko and T.N. Veziroglu, Eds., Association for Hydrogen Energy in Ukraine, Kiev (2005), pp. 151-152.


84    V. T. Lebedev, M. Rogante, Sans study of the precipitates phases microstructural evolution in Inconel 738 samples submitted to different ageing treatments, Proc. Int. Conf. “MATRIB ‘05”, Vela Luka, Croatia, 23-25/06/2005, K. Grilec, Ed., Croatian Society for Materials and Tribology, Zagreb, Croatia (2005), pp. 133-138.


83    M. Rogante, L. Rosta, Nanoscale characterisation by SANS and residual stresses determination by neutron diffraction related to materials and components of technological interest, Proc. of SPIE Vol. 5824, Opto-Ireland 2005: Nanotechnology and Nanophotonics, W. J. Blau, D. Kennedy and J. Colreavy, Eds., SPIE, Bellingham, WA, (2005), pp. 294-305.


82    I. Pelonzi, M. Rogante, Hydrogen induced cracking and stress corrosion in vessels and pipeline weldings, Proc. Int. Conf. “Mechanisation, Automation and Robotization in weldings and allied processes”, Zadar, Croatia, June 01.-04., 2005, Z. Kožuh, Ed., Croatian Welding Society, Zagreb, Croatia (2005), pp. 189-196.


81    M. Rogante, Industrial applications of neutron techniques: a recent overview related to materials and components of technological interest, Geophysical Research Abstracts, Vol. 7, 04880, (2005) SRef-ID: 1607-7962/gra/EGU05-A-04880, © European Geosciences Union, 2005.


80    M. Rogante, G. F. Ceschini, L. Tognarelli, E. Rétfalvi, V. T. Lebedev, Sans-study of the nano-defects in a NiCrMoV wheel of the axial compressor of a heavy duty gas turbine, J. Mat. & Design, 26/3 (2005) 191-195.


79    M. Rogante et al., Microstructural characterization by neutron techniques: industrial applications related to the pipeline sector, Proc. PRM ’05 Int. Conf., Exhibition & Workshops on Pipeline Rehabilitation & Maintenance 29 Jan-2 Feb, 2005, Manama, Bahrain. CD volume.


78    V. T. Lebedev, S. Kralj, M. Rogante, L. Rosta, G. To"ro"k, Industrial applications of welding project methods: state of the art and development perspectives, Proc. Int. Conf. “Welding and Joining-2005: Frontiers of Materials Joining”, Jan. 25-28, 2005, Tel-Aviv, Israel, pp. 163-177.


77    M. Rogante, V. T. Lebedev, F. Nicolaie, E. Rétfalvi, L. Rosta, SANS study of the precipitates microstructural evolution in Al 4032 car engine pistons, Physica B: Condensed Matter, 358/1-4 (2005), pp. 224-231.


76    M. Rogante, Residual Stresses by Neutron Diffraction and Microstructural Characterisation by SANS of Materials and Components of Technological Interest, Book of abstracts American Conference on Neutron Scattering ACNS 2004, College Park, Maryland, June 6–10, 2004, Neutron Scattering Society of America, (2004), WP54, p. 128.


75    A. Len, L. Rosta, E. Rétfalvi, P. Harmat, M. Rogante, Study of Materials Nanostructure by Small Angle Neutron Scattering, Studia, Universitatis Babes- Bolyai (UBB) journal, Physica, XLIX, 2 (2004), pp. 81-84.


74    M. Rogante, P. Battistella, F. Cesari, Hydrogen interaction and stress-corrosion in liquefied petroleum gas tanks, Book of abstracts Int. Symp. on Metal-Hydrogen Systems Fundamentals & Applications, Cracow, Poland, 5-10 Sept. 2004, H. Figiel, P. Mietniowski, A. Paja and E. Kulka, Eds., Univ. of Science and Technology, Krakow, Poland (2004), p. 87.


73    M. Rogante et al., Residual stress measurement by neutron diffraction in AA 6082 extruded samples submitted to different quenching rates, J. Alloys and Compounds, 378/1-2 (2004) pp. 335-338.


72    L. Pallottini, M. Rogante, X-ray detection by Si(Li) semiconductor counter for materials investigation, Proc. Int. Conf. “MATRIB ‘04”, Vela Luka, Croatia, 23-25/06/2004, K. Grilec, Ed., Croatian Society for Materials and Tribology, Zagreb, Croatia (2004), pp. 215-222.


71    M. Rogante, G. Török, G. F. Ceschini, L. Tognarelli, I. Füzesy, L. Rosta, High resolution diffraction for residual stress determination in the NiCrMoV wheel of an axial compressor for a heavy-duty gas turbine, Physica B: Condensed Matter, 350/1-3S (2004) pp. E479-E481.


70    V. T. Lebedev, S. Kralj, M. Rogante, L. Rosta, Welded joints project methods for nuclear/traditional industrial applications: the international state-of-the-art, Proc. 3rd Int. Conf. “Welding in Maritime Engineering”, Hvar, Croatia, June 02.-05., 2004, Z. Kožuh, Ed., Croatian Welding Society, Zagreb, Croatia (2004), pp. 87-98.


69    M. Balasko, M. Rogante, La radiografia neutronica al servizio dell’industria, Progettare, VNU, Ed., Cinisello B., Milano, Vol. 273 (2003), pp. 35-39. In Italian.


68    M. Rogante, Industrial applications of neutron techniques: a recent overview related to materials and components of technological interest, Proc. Int. Conf. “MATRIB ‘03”, Vela Luka, Croatia, 26-28/06/2003, K. Grilec, Ed., Croatian Society for Materials and Tribology, Zagreb, Croatia (2003), pp. 235-241.


67    V. Marinc(ák, P. Strunz, J. Šaroun, V. Ryukhtin, P. Lukáš, L. Cassì, G. F. Ceschini, M. Rogante, Non-destructive SANS investigation of in 738 turbine blades after high-temperature operation, Book of abstracts Int. Conf. ICM9, Geneva, Switzerland, May 25-29 2003, p. 165.


66    G. F. Ceschini, M. Rogante, L. Rosta, Feasibility study for the characterisation, by neutron techniques, of an axial compressor wheel of a heavy-duty gas turbine, Proc. Int. Conf. “MATRIB ‘02”, Vela Luka, Croatia, 20-22/06/2002, L. C'urcovic' and K. Grilec, Ed., Croatian Society for Materials and Tribology, Zagreb, Croatia (2002), pp. 25-30.


65    G. Cicognani, E. Escoffier, G.M. Guadalupi, L. Pallottini, M. Rogante, Investigation by g-ray diffraction of the crystalline quality of GaAs and InP single crystals, Applied Radiation and Isotopes, UK, 56/6 (2002), pp. 833-836. doi:10.1016/S0969-8043(02)00053-2.


64    S. Pajeda, L. Aidukaite., R. Vaišnoras, P. Adomenas, M. Rogante, Thermoelectric phenomena in the PDLC films, Proc. of SPIE Vol. 4415, Optical Organic and Inorganic Materials, S. P. Asmontas and J. Gradauskas, Eds., SPIE, Bellingham, WA (2001), pp. 156-161.


63    M. Rogante, Misurazione delle tensioni residue mediante diffrazione neutronica, Rivista Italiana della Saldatura, Istituto Italiano della Saldatura, Ed., Genova, Vol. 4 (2001), pp. 461-465. In Italian.


62    M. Rogante, Tessitura e proprietà dei materiali, Progettare, VNU, Ed., Cinisello B., Milano, Vol. 247 (2001), pp. 72-76. In Italian.


61    M. Rogante, Structure of a small-medium size cast iron foundry in Italy, Proc. Int. Conf. “MATRIB ‘01”, Vela Luka, Croatia, 20-22/06/2001, K. Grilec, Ed., Croatian Society for Materials and Tribology, Zagreb, Croatia (2001), pp. 303-310.


60    M. Rogante, Dalla serie all’applicazione particolare, Rivista di Meccanica Oggi, VNU, Ed., Cinisello B., Milano, vol. 43 (2001), pp. 122-125. In Italian.


59    F. G. Cesari, G. Ferrari, V. Molinari, P. Battistella, M. Rogante, A simplified evaluation model of Residual Stresses distribution in weldings, Proc. 4th Eur. Conf. on welding, joining and cutting “EUROJOIN 4”, Cavtat, Dubrovnik, Croatia, 24-26/05/01, pp. 251-256.


58    M. Rogante, Residual stresses evaluation by neutron diffraction: some industrial applications and perspectives, Proc. Int. Workshop on New Opportunities in Single Crystal Spectroscopy with Neutrons, Balaton (Révfulop), Hungary, 19-22/04/2001, KFKI-2001-01/E Report, J. Fuzi and L. Rosta, Eds., Budapest (2001), pp. 79-80.


57    M. Rogante, Misurazione delle tensioni residue mediante diffrazione neutronica, Impiantistica Italiana, Animp, Ed., Milano, Vol. 2 (2001), pp. 43-46. In Italian.


56    S. Pajeda, S. Pajediene., R. Vaišnoras, P. Adomenas, M. Rogante, Polarization features of the deformed PDLC film, Mol. Cryst. and Liq. Cryst., Vol. 351 (2000), pp. 43-49.


55    L. Aidukaite., R. Glasinskas, S. Pajeda, O. Adome.niene., M. Rogante, R. Vaišnoras, "Polarized FTIR and X-ray diffraction studies of the metalloorganic compounds containing Cu2+, Ni2+ and Mn2+ ions", Book of abstracts Int. Conf. Advanced OpticalMaterials and Devices ADOM-2, Vilnius, Lithuania, 16-19 Aug. 2000, Ed. PFI - Semiconductor Physics Institute, Vilnius, Lithuania (2000), p. 88.


54    M. Rogante (engineering@interfree.it), Tecnica neutronica come soluzione, Rivista di Meccanica Oggi, VNU, Ed., Cinisello B., Milano, Vol. 37 (2000), pp. 18-19. In Italian.


53    M. Rogante, Residual stresses determination by neutron diffraction in Al alloy extruded samples submitted to quenching rate gradients, Proc. Int. Conf. “MATRIB 2000”, Vela Luka, Croatia, 21-24/06/2000, K. Grilec, Ed., Croatian Society for Materials and Tribology, Zagreb, Croatia (2000), pp. 301-309.


52    M. Rogante, Informazioni preziose dall'utensile, Rivista di Meccanica Oggi, VNU, Ed., Cinisello B., Milano, Vol. 27 (2000), pp. 74-80. In Italian.


51    M. Rogante, Scattering neutronico per la caratterizzazione dei materiali, ICP Rivista dell’industria chimica, ERIS C. T. SRL, Ed., Milano, Vol. 3 (2000), pp. 108-112. In Italian.


50    M. Rogante, The stress-free reference sample: the problem of the determination of the interplanar distance d0, Physica B: Condensed Matter 276-278 (2000) 202-203. DOI:10.1016/S0921-4526(99)01281-8.


49    M. Rogante, Inox al servizio della scienza, Inossidabile, Centro Inox, Ed., Milano, Vol. 138 (1999), pp. 3-4. In Italian.


48    M. Rogante, I grandi serbatoi per il progetto Borexino, Rivista Italiana della Saldatura, Istituto Italiano della Saldatura, Ed., Genova, Vol. 6 (1999), pp. 695-699. In Italian.


47    M. Rogante et al., Tecniche neutroniche al servizio dell’industria, Progettare, Jackson, Ed., Cinisello B. (MI), Vol. 228 (1999), pp. 35-39. In Italian.


46    O. Adome.niene., L. Aidukaite., R. Glasinskas, S. Pajeda, M. Rogante, R. Vaišnoras, Polarized FTIR spectroscopy and thermodynamic properties of the metallo-organic compounds containing Cu2+, Ni2+ and Mn2+ ions, Book of abstracts Eur. Conf. on Liquid Crystals “ECLC 99” April, 1999, Hersonissos/Crete, Greece, (1999), P3-031.


45    M. Rogante et al., Neutron techniques in the service of industry”, Proc. Int. Conf. “Matest ’99 – Advanced NDT techniques”, Cavtat, Croatia, 23-24/09/1999, Croatian Society for Non-destructive Testing, Ed., Zagreb, Croatia (1999), pp. 233-240.


44    M. Rogante et al., Il diffrattometro del laboratorio “Léon Brillouin” di Saclay, Lamiera, Tecniche Nuove, Ed., Milano, Vol. 8 (1999), pp. 142-145. In Italian.


43    M. Rogante, Serbatoi per la rilevazione di neutrini solari, Impiantistica Italiana, Animp Servizi SRL, Ed., Milano, Vol. 4 (1999), pp. 39-44. In Italian.


42    M. Rogante, La Walter Tosto SPA e l’esperimento Borexino, L’Industria Meccanica, A. S. A. SRL, Ed., Milano, Vol. 543 (1999), pp. 44-47. In Italian.


41    M. Rogante, Sorgenti di neutroni: i laboratori di Chalk River, Lamiera, Tecniche Nuove, Ed., Milano, Vol. 6 (1999), pp. 120-126. In Italian.


40    M. Rogante, Energia e vibrazioni come indici d’usura d’inserti in carburi sinterizzati, Utensili e Attrezzature, Tecniche Nuove, Ed., Milano, Vol. 5 (1999), pp. 40-44. In Italian.


39    M. Rogante, Serbatoi cilindrici e sferici per il progetto “Borexino”, ICP Rivista dell’industria chimica, ERIS C. T. SRL, Ed., Milano, Vol. 6 (1999), pp. 98-101. In Italian.


38    M. Rogante, Required energy-roughness: a necessary parameter of wear evaluation for inserted tools in lathes processes, Proc. Int. Conf. “MATRIB ‘99”, Trogir, Croatia, 27-28/05/1999, V. Ivušic', Ed., Croatian Society for Materials and Tribology, Zagreb, Croatia (1999), pp. 339-346.


37    G. Albertini, G. Bruno, M. Rogante, Determinazione delle tensioni residue in un tubo saldato di acciaio ferritico 2,25Cr 1Mo prima e dopo trattamento termico, Tecnologie del Filo, Tecniche Nuove, Ed., Milano, Vol. 2 (1999), pp. 44-49. In Italian.


36    M. Rogante, “Pane, stampi e fantasia”, Stampi, Tecniche Nuove, Ed., Milano, Vol. 4 (1999), pp. 100-102. In Italian.


35    M. Rogante, R. Tartaglia, Il progetto “Borexino” per la misurazione dei neutrini solari, Lamiera, Tecniche Nuove, Ed., Milano, Vol. 4 (1999), pp. 118-128. In Italian.


34    M. Rogante, Questione di feeling, Lamiera, Tecniche Nuove, Ed., Milano, Vol. 3 (1999), pp. 144-150. In Italian.


33    M. Rogante, Sorgenti di neutroni: il “BNC” di Budapest, Lamiera, Tecniche Nuove, Ed., Milano, Vol. 2 (1999), pp. 105-109. In Italian.


32    M. Rogante et al., Determination of residual stresses in materials and industrial components by neutron diffraction, Meas. Sci. Technol. , UK, 10 (1999) R56-R73.


31    M. Rogante, Sorgenti di neutroni: il “CFANR” dell’Istituto di Fisica Nucleare di R(ež (Praga), Lamiera, Tecniche Nuove, Ed., Milano, Vol. 1 (1999), pp. 106-112. In Italian.


30    M. Rogante, Dimmi con cosa fresi…, Stampi, Ed. Tecniche Nuove, Milano, Vol. 1, (1999), pp. 136-138; Utensili e Attrezzature, Tecniche Nuove, Ed., Milano, Vol. 3 (1999), pp. 56-58. In Italian.


29    M. Rogante: “Eccentriche” con stile, Lamiera, Tecniche Nuove, Ed., Milano, Vol. 11 (1998), pp. 72-76. In Italian.


28    M. Rogante, Unici e irripetibili - i miracoli del Concept Design, Stampi, Tecniche Nuove, Ed., Milano, Vol. 9 (1998), pp. 136-141. In Italian.


27    S. Mataloni, M. Rogante, E se domani il laser YAG, Lamiera, Tecniche Nuove, Ed., Milano, Vol. 9 (1998), pp. 176-182. In Italian.


26    M. Rogante, Vibrations and required energy, as wear and tear indices of sintered carbide inserted tools, Proc. Int. Conf. “MATEST ‘98”, Brijuni, Croatia, 01-02/10/1998, Croatian Society for Non-destructive Testing, Ed., Zagreb, Croatia (1998), pp. 289-297.


25    M. Rogante, Sorgenti di neutroni: il “BENSC” dell’Hahn-Meitner-Institut (HMI), Lamiera, Tecniche Nuove, Ed., Milano, 8 (1998), pp. 190-194. In Italian.


24    M. Rogante (pseudonym: Lorenzo Francesco), Il futuro è già qui, Lamiera, Tecniche Nuove, Ed., Milano, Vol. 7 (1998), pp. 104-108. In Italian.


23    M. Rogante, Sorgenti di neutroni: la “SINQ” del Paul Scherrer Institut, Lamiera, Tecniche Nuove, Ed., Milano, Vol. 7 (1998), pp. 82-87. In Italian.


22    M. Rogante, Il salto evolutivo, Lamiera, Tecniche Nuove, Ed., Milano, Vol. 5 (1998), pp. 316-324. In Italian.


21    A. Dicembre, M. Rogante, Il Laser tra presente e futuro, Lamiera, Tecniche Nuove, Ed., Milano, Vol. 4 (1998), pp. 86-93. In Italian.


20    R. Vaišnoras, S. Pajediene., S. Pajeda, D. Martunas, J. Ravinskas, J. Galyametdinov, F. Gasparrini, M. Rogante, F. Rustichelli, B. Yang, Spectroscopic and thermodynamic properties of Er3+, Nd3+ and Tb3+ containing LC, Proc. of SPIE Vol. 3319, Liquid Crystal: Chemistry and Structure, M. Tyarska, R. Dabrowski and J. Zielinski, Eds., SPIE, Bellingham, WA (1998), pp.174-176.


19    R. Vaišnoras, S. Pajediene., S. Pajeda, D. Martunas, J. Ravinskas, O. Adome.niene., F. Gasparrini, M. Rogante, F. Rustichelli, B. Yang, Spectral investigation of Cu(II) and Ni(II) metallo-organic complexes, Proc. of SPIE Vol. 3319, Liquid Crystal: Chemistry and Structure, M. Tyarska, R. Dabrowski and J. Zielinski, Eds., SPIE, Bellingham, WA (1998), pp. 170-173.


18    S. Pajeda, S. Pajediene., R. Vaišnoras, O. Adome.niene., F. Gasparrini, M. Rogante, F. Rustichelli, B. Yang, Electro-optical response in PDLC film, Proceedings of SPIE Vol. 3318, Liquid Crystal: Physics, Technology, and Applications, J. Rutkowska, S. J. Klosowicz, J. Zielinski and J. Zmija, Eds., SPIE, Bellingham, WA (1998), pp. 422-426.


17    S. Pajeda, S. Pajediene., R. Vaišnoras, O. Adome.niene., F. Gasparrini, M. Rogante, F. Rustichelli, B. Yang, Shear deformation and electro-optical on and off switch in PDLC film, Proc. of SPIE Vol. 3318, Liquid Crystal: Physics, Technology, and Applications, J. Rutkowska, S. J. Klosowicz, J. Zielinski and J. Zmija, Eds., SPIE, Bellingham, WA (1998), pp. 418-421.


16    L. Gobbi, M. Rogante, F. Rustichelli, L’inquinamento da amianto, Antinquinamento, Tecniche Nuove, Ed., Milano, Vol. 1 (1998), pp. 74-78. In Italian.


15    M. Rogante, Sensibili alle vibrazioni, Lamiera, Tecniche Nuove, Ed., Milano, Vol. 2 (1998), pp. 134-143. In Italian.


14    M. Rogante, La diffrazione dei neutroni al servizio dell’industria, Lamiera, Tecniche Nuove, Ed., Milano, Vol. 2 (1998), pp. 114-120. In Italian.


13    M. Rogante, Vibrazioni delle M. U.: non andiamo “a orecchio”, Lamiera, Tecniche Nuove, Ed., Milano, Vol. 1 (1998), pp. 130-137. In Italian.


12    M. Rogante et al., Sforzi residui in componenti saldati - determinazione non distruttiva mediante diffrazione neutronica, Lamiera, Tecniche Nuove, Ed., Milano, Vol. 10 (1997), pp. 152-161. In Italian.


11    M. Rogante et al., Determinazione non distruttiva mediante diffrazione neutronica degli sforzi residui in componenti saldati, Rivista Italiana della Saldatura, Istituto Italiano della Saldatura, Ed., Genova, Vol. 5 (1997), pp. 449-455. In Italian.


10    G. Albertini, M. Rogante, Inserti sinterizzati: usura nelle lavorazioni di semifinitura e sgrossatura, Utensili e Attrezzature, Tecniche Nuove, Ed., Milano, 5 (1997), pp. 88-91. In Italian.


9    Albertini, M. Rogante, Il problema delle vibrazioni delle macchine utensili, Atti Conf. Naz. sulle Prove non Distruttive Monitoraggio Diagnostica – 9° Congresso Nazionale dell’AIPnD, Padova, 25-27/09/1997, AIPnD, Ed., Padova (1997), pp. 833-843. In Italian.


8    G. Albertini, G. Marcellini, M. Rogante, Inserti sinterizzati: usura nelle lavorazioni al tornio, Utensili e Attrezzature, Tecniche Nuove, Ed., Milano, 3 (1997), pp. 64-71. In Italian.


7    M. Rogante et al., Studies of residual stresses, microstructural evolution and texture in steels and alloys by neutron techniques, Proc. ECSC Workshop “Modelling of steel microstructural evolution during thermomechanical treatment”, Brussels, Belgium, (1997) pp. 185-195; ISBN 92-827-9891-7; CG-NA-17585-EN-C.


6    G. Albertini, M. Rogante, Wear and tear of sintered carbide inserted tools during semi finishing and rough-shaping processes, Proc. 5th Eur. Conf. on Advanced Materials and Processes and Applications “EUROMAT ‘97”, Maastricht, Netherlands, 21-23/04/1997, L. A. J. L. Sarton and H. B. Zeedijk, eds., Netherlands Society for Materials Science, Aj Zwijndrecht, Netherlands (1997), Vol. 4° pp. 449-453.


5    G. Albertini, G. Marcellini, M. Rogante, Caratterizzazione dell’usura degli inserti in carburi sinterizzati impiegati nelle lavorazioni di semifinitura e sgrossatura al tornio, Atti 26° Conv. Naz. AIM, Milano, 6-8/11/1996, AIM-Associazione Italiana di Metallurgia, Ed., Milano (1996), Vol. 2, pp. 126-134. In Italian.


4    N. Antolotti, S. Bertini, F. Fiori, M. Rogante, F. Rustichelli, Caratterizzazione e controllo di qualità di ricoprimenti ceramici, Atti IV° Conv. Naz. GIB, L’Aquila, 09-11/10/1996, GIB-Gruppo Interdivisionale Biomateriali, Ed., L’Aquila (1996), p. 59. In Italian.


3    M. Rogante et al., Neutron large and small angle diffraction techniques in industrial and automotive applications, Proc. 1st Int. Conf. on Control and Diagnostics in Automotive Applications, Genova, 03-04/10/1996, SGE-Servizi Grafici Editoriali, Ed., Padova (1996), pp. 155-166.


2    M. Rogante et al., Non-destructive determination of rual stresses in materials and weldings by neutron diffraction technique, Proc. 1st Int. Conf. “MATEH 1996 – Development, Testing and Application of Materials”, Opatija, Croatia, 02-05/10/1996, Croatian Society for Materials and Tribology, Ed., Zagreb, (1996), pp. 187-194.


1    M. Rogante et al., Determinazione non distruttiva mediante diffrazione neutronica degli sforzi residui in componenti saldati, Atti 1a Conf. Naz. sulla saldatura e le costruzioni saldate, Genova, 29/06/1996-03/07/1996, Istituto Italiano della Saldatura, Ed., Genova (1996), pp. 713-726. In Italian.

 
Torna ai contenuti | Torna al menu